буровая установка
 
+7 960 053-0909
Интернет магазин
Ваша корзина пуста
   
 
         
  
 

EN

SELF-PROPELLED DRILLING RIG model UKB-4SА4

Is intended for drilling of vertical prospecting holes for hard non-metallic and ore minerals, water,etc.from the surface of the ground.

TECHNICAL CHARACTERISTICS

Drilling rig SKB- 4130
Mud pump NB-160/6,3
Motor diesel motor Д144-81
Overall dimensions in working position, mm 9800х2860x15000
Mass of installation, kg    
on chassis of МАZ 12550  
on chassis of URAL 13150  
on chassis of КRAZ 17100  
Initial drill diameter, mm 200  
Driving pipe diameter, mm 54  
Drilling depth, m 500  
Transporting means chassis of the automobile URAL-4320, MAZ- 5334(5337), or KRAZ- 260
Drilling rig SKB- 4130
Mud pump NB-160/6,3
Motor diesel motor Д144-81
Overall dimensions in working position, mm 9800х2860x15000
Mass of installation, kg    
on chassis of МАZ 12550  
on chassis of URAL 13150  
on chassis of КRAZ 17100  

DRILLS HOLES model SKB-41

Drill holes:
-for solid ore and mineral deposits, water and so on;
-by rotary and rotary-percussion methods.

TECHNICAL CHARACTERISTICS

  SKB-4100 SKB-4120 SKB-4130
Max tractive effort of the hoist, kN 26 26 26
Spindle speed rotaty drilling, rpm 145…1500145…1500 145…1500
Feed length of the spindle, mm 400 400 400
Spindle aperture diameter, mm 55 55 55
Rope spooling speed, m/s 0,9…4,0 0,9…4,0 0,9…4,0
Maximum spindle torque, Nm 1270 1270 1270
Overall dimensions, mm:      
Length 1830 4200 1800
Width 1200 1300 1200
Height 1800 1800 1800
Mass, kg 1800 1600 1950

MUD PUMP model NB-160/6,3

This pump is intended for delivery of drilling fluid  in the process of boring  the geological prospecting  holes  up to 2,000 m  deep with different types of rock-breaking tools.
The pump can also be used for pumping over fresh and salt water, petroleum-based chemical -neutral fluids and so on.
With ball valves the pump can be used for pumping over the plugging mixtures and other viscous solutions.
The pump is manufactured in two versions: with and without an electric motor (with a pulley on the gearbox input shaft for outside motor drive via a v-belt transmission).

TECHNICAL CHARACTERISTICS

Delivery, I per min:  
with plunger 45 mm in diameter 8, 10,22, 40, 65
with plunger 70 mm in diameter 20, 22, 50, 95, 160
Delivery pressure, MPa:  
with plunger 45 mm in diameter 6,3
with plunger 70 mm in diameter 4,5
Number of plungers 3
Suction lift m of w.c. 5
Rotation frequency of input shaft gearbox, rpm 1470
Drive power, kW 11
Overall dimensions, mm 1360х830х1470
Weight, kg 650

 
 
     
Copyright © 2011 ИП Гараев З. М.
Тел.: +7 960 053-0909
буровая установка Администратор
 
 
Rambler's Top100 Яндекс цитирования
 
  Создание сайта Вебцентр